Shake the spray can thoroughly, at least 3 minutes
Remove the cap / nozzle and turn upside down, so the security ring comes loose. Put cap back on.
Let dry
Apply Rust EFFECT
Pre-priming is required for application on polystyrene (Use Montana Styrofoam primer and make sure to seal the surface completely). Color as shown by the donut on the can. USE: Best working temperature between +10°C and +25°C. For best results apply at 25cm from the object. Apply in thin even layers, in a sweeping motion with at least 2 min drying time between each pass. Allow 24h curing time before applying other coatings. Always test spray on a non-visible area to check the compatibility of lacquer or paint.