Spraypaint Car-Rep 2K EPOXY Primer 500ml

2K Primer • Item ID: CR-CR20030517

249 kr

Choose color

Available in stock

Spraypaint Car-Rep 2K EPOXY Primer 500ml with rust inhibitors (prevents rust) creates a water- and airtight film. It forms an extremely well-bonded layer on putties, which can be applied directly on the primer without sanding. It can also It forms an extremely well-bonded layer on putties, on metals, including galvanized metal, aluminium, copper and brass. It promotes bonding on various surfaces such as carbon fiber and most plastics used in automotive OEM. The revolutionary short 10 minute baking time ensures excellent time and cost savings. Car-Rep 2K Epoxy Primer can be applied outside spray booths, which saves time and costs.

Shake can for at least 3 minutes before use.

View all products by CAR-REP

Antal	Styckpris	Totalt
0	249 kr	0 kr

Beige

In stock • 249 kr •

Grey

In stock • 249 kr •

Black

In stock • 249 kr •

Antal	Styckpris	Totalt
0	249 kr	0

4

Spraypaint Car-Rep 2K EPOXY Filler 500ml
2K filler
249 kr
Info Buy
Spraypaint Car-Rep 2K Sprayfiller Beige 500ml
2K filler
249 kr
Info Buy
Spraypaint Car-Rep 2K PU Clear Coat High Gloss 500ml
High Gloss
269 kr
Info Buy

Features:

Fast application with short 20 minute infrared baking time in 70 °C
Can be applied directly to various metals, plastics and carbon fiber
Putties can be applied directly to primed surfaces
Excellent anti-corrosion and bonding properties
Easy application with short flash off-times
No pot life, can be used again when needed

Shake can for at least 3 minutes before use. Test the spray on another surface. Spray distance 15-20 cm.
Areas to be filled with putty: apply 1-2 coats.
Areas to be directly base coated: apply 3 coats.
Intermediate flash-off 2 min, final flash-off 5 min.
Sanding: Make sure that sand-throughs and edges are levelled out correctly.
Clean: Surfaces must be cleaned and degreased before application.
Drying time: 20 °C 16 h
Drying time short wave IR equipment: Full power 20 min depends on the surface thickness.
Surface temperature 70 °C.
1 layer: 20 microns
2 layers: 30-40 microns

Can recoated at any time with Car-Rep® 2K Epoxy Primer. Clean the can by spraying upside down until only propellant comes out.

Ready to apply putty or sanding: IR when cooled down, baking when cooled down 20 °C overnight.

Coverage 1.2-1.4 m2 30-40 microns