Next delivery:

Spraypaint Car-Rep 2K EPOXY Filler 500ml

2K filler  •  Item ID: CR-CR20030110
249 kr
Available in stock

Spraypaint Car-Rep 2K EPOXY Filler 500ml is a filler that contains epoxy. Epoxy's low surface tension and good adhesion make it easy to fill scratches and abrasions on metal.

The epoxy mixture ensures excellent anti-corrosion properties, high fillability, easy application and sandability as well as fast drying time. Available in several colors and minimizes the cost and time of applying the base coat making it a really affordable primer. 2K Epoxy Fillers are recommended for use with 2K Epoxy Primer. The combination creates two completely airtight and waterproof layers and reduces working time to a minimum. 2K Epoxy Filler can be applied outside the spray boxes, saving time and costs.

Shake can for at least 3 minutes before use.

The curing process begins immediately in the atmospheric pressure and the contents do not need to be activated before use as a normal two-component spray.

Antal Styckpris Totalt
0 249 kr 0 kr
White VP-1
In stock 249 kr
Light Grey VP-2
In stock 249 kr
Mid Grey VP-3
In stock 249 kr
Dark Grey VP-4
In stock 249 kr
Antal Styckpris Totalt
0 249 kr 0

Features:

  • High filling power with short 3 min flash-off time
  • After 15 minutes final flash-off the surface can be infrared dried or baked
  • Semi-gloss surface, non-sanded area easy to see. Does not block sanding paper.
  • Excellent anti-corrosion and bonding properties
  • Can be coated with solvent or waterborne base coats
  • No pot life, can be used again when needed
Documents:
attachment Safety Data Sheet

Clean: Surfaces must be cleaned and degreased before application. Shake can for at least 3 minutes before use. Test the spray pattern on another surface. 2-3 coats. Spray distance 15-20 cm. Intermediate flash-off 3 min, final flash-off 15 min. Drying time: 20 °C 16h. Drying time short wave IR equipment (70 °C): Full power 20 min depends on the surface thickness.

Surface temperature 70 °C. 1 layer: 20 microns, 2-3 layers: 40-60 microns. Can be recoated anytime with Epoxy Filler. Clean the can by spraying upside down until only propellant comes out. Ready for sanding or base coat IR when cooled down: Baking when cooled down, 20 °C 16h

Coverage 1.2-1.4 m2 50-60 micron dry film thickness (3 layers) film thickness (2 layers)

Customers also bought

© 2001–2024 Highlights/KR Distribution AB.

Svenska English
SEK

Highlights Est. 2001


info@hlstore.com

  •  Deliveries everyday
  •  Shipping from 9 EUR 
  •  19 years experience



I forgot my password